Shandong Ultisolar New Energy Co., Ltd

USC-HS21TB Hall Flow Sensor G1/2" DN15mm 1-30L/min

 Hall Effect Flow Sensor

Model: USC-HS21TB

Explanation:

 

US: UltiSensor;C:Copper N: Nylon; H: Hall Sensor; S: Straight; 41:G1/4,6mm; P: Plug; T: Threaded; 

E: Elbow; T: Threaded; 21: G1/2’; 43: G3/4”;

 

Function: For the sense of the water flow rate on the following equipments: Thermostatic water heater, water purifier, water dispenser, smart card equipment, coffee machine etc.

Calculation Formula: F(Hz)= 8.1*flow rate(Q)-6(l/min)

Note:

1. When magnetic material is close with the sensor, its characteristics may vary.

2. In order to avoid particle debris, the sensor must be installed after a filter.

3. The flow sensor installation has to avoid strong vibration and shaking of the environment, so as not to affect the sensor's measurement accuracy.

Features:

4.       Copper material, environmental friendly material, small, flexible and functional.

5.       Intubation design of inlet and outlet pipe, easy connection and operation;

6.       Imported Hall IC from Japan, stable and reliable;

7.       Range: 1-30L/min;

8.       working voltage: DC3-18V;

9.       rated voltage: DC5V;

10.   Output voltage(rated: DC 5V); High level 4.5V and above; low level 0.5V and below

11.   Pulse output duty cycle: 50+-10%

12.   Insulation resistance: 100M Ohm and above;

13.   Tightness: Seal up all the holes, and inflate with 1.7MPa water, after 1 minute, no leakage and deformation;

14.   -20-80 centigrade;

15.   One year warranty

Ultisolar Group:  Shop Ultisolar -|-Ultisensor.com -| -Ultisolar.cn中文版

Copyright © 2010 Shandong Ultisolar New Energy Co., Ltd All rights reserved.

鲁ICP备17032917号-5 Powered by Z-blog