Shandong Ultisolar New Energy Co., Ltd

USN-HS21TC Hall Effect Flow Sensor G1/2" DN15mm

 


G1/2" Hall Effect Flow Sensor USN-HS21TC DN15mm

Pic

Model

USN-HS21TC

Explanation

 US: UltiSensor; N: Nylon; H: Hall Sensor; S: Straight; 41:G1/4,6mm; P: Plug; T: Threaded; A: Type A

E: Elbow; T: Threaded; 21: G1/2’; 43: G3/4”; M: female and male thread for inlet and outlet separately; A: Type A

 

Function

For the sense of the water flow rate on the following equipments: Thermostatic water heater, water purifier, water dispenser, smart card equipment, coffee machine et

Calculation Formula Please contact the seller
Features

1.       Nylon material, durable and economical.

2.       Intubation design of inlet and outlet pipe, easy connection and operation;

3.       Imported Hall IC from Japan, stable and reliable;

4.       Range: 1-30L/min;

5.       working voltage: DC3-18V;

6.       rated voltage: DC5V;

7.       Output voltage(rated: DC 5V); High level 4.5V and above; low level 0.5V and below

8.       Pulse output duty cycle: 50+-10%

9.       Insulation resistance: 100M Ohm and above;

10.   Tightness: Seal up all the holes, and inflate with 1.7MPa water, after 1 minute, no leakage and deformation;

11.   -20-80 centigrade;

12.   One year warranty 

Note:

1. When magnetic material is close with the sensor, its characteristics may vary.

2. In order to avoid particle debris, the sensor must be installed after a filter.

3. The flow sensor installation has to avoid strong vibration and shaking of the environment, so as not to affect the sensor's measurement accuracy.

 G1/2" Hall Effect Flow Sensor USN-HS21TC DN15mm

Ultisolar Group:  Shop Ultisolar -|-Ultisensor.com -| -Ultisolar.cn中文版

Copyright © 2010 Shandong Ultisolar New Energy Co., Ltd All rights reserved.

鲁ICP备17032917号-5 Powered by Z-blog